Victron Energy, mppt solar charge controller
Victron SmartSolar MPPT 100/30
Also written as MPPT 100/30, SCC110030210
A 30 A MPPT charge controller for 12 or 24 V batteries, with Bluetooth setup and monitoring.
Best for
An RV or van with up to about 440 W of panels on a 12 V battery, or 880 W on 24 V.
Photo pending: we only show images we own or are licensed to use.
Strengths and limitations
Strengths
- Auto-selects 12 or 24 V; 30 A charge current (Victron).
- Up to 98% efficiency; 30 mA self-consumption at 12 V (Victron).
- Bluetooth through the VictronConnect app (Victron).
- Safety standards listed: EN/IEC 62109-1, UL 1741, CSA C22.2 (Victron).
Limitations
- IP43 electronics and IP22 connection area: mount it indoors, out of spray.
- No load output is listed for the 100/30 on Victron's specification page.
What it does not do
- Make AC power: it only charges the battery. Pair it with an inverter for outlets.
- Take more than 100 V open-circuit from the panels, including the rise on a cold morning (Victron).
- Run at full output above 40 C; it derates in a hot bay (Victron).
Specifications
From the cited source on 2026-11-10. "Not verified" means no source we checked published it.
| Battery voltage | 12 or 24 V, auto select [1] |
|---|---|
| Charge current | 30 A [1] |
| Panel power | 440 W at 12 V, 880 W at 24 V [1] |
| Max panel voltage | 100 V open-circuit [1] |
| Max panel short-circuit current | 35 A [1] |
| Max efficiency | 98% [1] |
| Operating temperature | -30 to 60 C (full output to 40 C) [1] |
| Protection | IP43 electronics, IP22 connection area [1] |
| Size / weight | 130 x 186 x 70 mm / 1.3 kg [1] |
| Safety standards | EN/IEC 62109-1, UL 1741, CSA C22.2 [1] |
Before you buy
- Size the wire and fuse between controller and battery for the full 30 A.
Sources
- SmartSolar MPPT 100/30 and 100/50 technical specifications, Victron Energy (manufacturer), read 2026-11-10. Re-read 2026-11-10 (evening). 100/30: 12 or 24 V auto select; 30 A rated charge current; nominal PV power 440 W at 12 V, 880 W at 24 V; max PV short-circuit current 35 A; max PV open-circuit voltage 100 V; max efficiency 98%; self-consumption 30 mA at 12 V; -30 to 60 C (full output to 40 C); IP43 electronics, IP22 connection area; 1.3 kg; 130 x 186 x 70 mm; Bluetooth via VictronConnect; safety standards EN/IEC 62109-1, UL 1741, CSA C22.2.